Force Global Impulse Heat Sealing Technologies and Solutons
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

ROPEX RES-403 Resistron:

RES-403 | In-stock USA

The ROPEX Resistron RES-403 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-403 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

  • Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

  • Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

  • Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

  • Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

  • Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

  • 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-403 contains the following features:

ROPEX RES-403 Features:

Ropex Resistron RES-403 Heat Seal Controller
  • µC-Technology

  • Automatic zero calibration, push button (AUTOCAL)

  • Automatic optimization (AUTOTUNE)

  • Automatic frequency adjustment

  • Large current and voltage range

  • Alarm function with fault diagnostics

  • Selectable temperature range (0...300°C, 0...500°C)

  • Temperature set point selection with (PD) potentiometer

  • 0...10VDC analog output for ACTUAL temperature

  • Temperature display using (ATR) temperature meter

  • Activated with contact or 24VDC signal

  • Automatic configuration of secondary voltage and current ranges
    (AUTORANGE, as of October 2005)

  • Automatic phase angle compensation (AUTOCOMP, as of October 2005)

  • Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)


  • RES-403 Operating Instructions:

ROPEX RES-403 Resistron Part Numbers:

Part numbers for 115, 230 and 400VAC units

  • RES-403/115VAC Part No. 740301

  • RES-403/230VAC Part No. 740302

  • RES-403/400VAC Part No. 740303

  • Alternate industry names for RES-403 controllers:

    • RES-403, RES403, RES_403, res-403, res403, res_403

Upgrades:

  • The RES 200 series has been replaced by the newer RES 400 series with micro-processor technology. The RES-403 replaces the now obsolete RES-203.

  • Alternate industry names for RES-203 controllers:

    • RES-203, RES203, RES_203, res-203, res203, res_203

    RES-203 Upgrade Instructions:

ROPEX RES-403 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories and Modifications:

... available for the Ropex Resistron Heatseal Controllers:

Contact

P: 414 507-9378

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links